Picbasic Pro Serial Communication Code Updates And
Picbasic Pro Serial Communication Software And Hardware
Picbasic Pro Serial Communication Install Into A

Maybe the D-Stick is there and PICBasic Student Edition is their Hobbyists Corner.

Bootloaders must be written and compiled for exactly the setup you are using: Any tiny little thing wrong and it wont work- very frustrating.

Unless the unit comes with a bootloader already programmed into the chip Python Serial Examples Arduino Serial Examples Again, the documentation sucks.

Picbasic Pro Serial Communication Software And Hardware

If you have a PICKIT2 or 3, you could program it, but not without making your own cable to get the pin-out correct, unless they include this Buy a dev board from Microchip, they spent millions getting the software and hardware right, ME Labs, not-so-much.

In summary: Learning to program these things is hard enough without having to struggle with a poorly documented board, lifes too short.

Picbasic Pro Serial Communication Install Into A

Picbasic Pro Serial Communication Code Updates And

A bootloader is a program you must first install into a micro using a programmer so code updates and such do not require a programmer.

This board you chose works with something they call the EPIC programmer.

I suggest you look into that or some comparable programmer and forget this bootloader idea.

Probably best to chuck the EPIC thing and get a PICkit but they wired the EPIC socket so it is not comparable without a pin adaptor socket.

Their programmers are rather expensive compared to PICkits and I dont see they have in circuit debugging ability.

What advantage does using the IDE for PBP have Does it do in circuit debugging If not then it is not recommend for use.

I once used PBP and found I has some serious issues such as not flagging bad syntax and report successful compilation.

Microchip gives away very good C compilers so I dont see the need togonthrd party and pay for one.

If I was to pay to use Basic I would use Oshonsoft Basic as it is very good and quite inexpensive.

There are Development boards that use PICkits directly, similar price.

I have both the PICkit II and III (I also have the PICkit I but that is a diffent thing) and while I prefer the way II works over III it is the III that is compatable with all newer PICs and is still supported by Microchip.

As for what it takes to get up to speed on the Microchip platforms, the time you spend messing around with getting third party stuff to work would be much better spent in getting up to speed with MPLAB, XC8 and debugging with PICkits.

Even with things like Code Configurator (which I guess is getting better, I dont use it) if you are going to do anything worthwhile, you eventually will have to come to grips with the internals of the PIC and its peripherals.

Im sort of catching on that coders settle in with a favorite chip.

Is that the case I think I might have bought enough PICs then.

Ive been using different boards and software so have chips that are supported by them.

They seriously need a Hobbyists corner like CSS and there C Compiler has.